Key highlights

  • Magmatic Resources (ASX:MAG) reported gold mineralisation along 320 metres at Otto 2.
  • The wider Weebo program comprised 12 holes for 2,596 metres.
  • The company intends to use wireline logging to refine follow-up drilling.

Magmatic Resources (ASX:MAG) traded 10.53% lower at AUD 0.017 on 20 November 2026. The broader S&P/ASX 200 index also traded lower. The company, a mineral explorer with gold interests in Western Australia, reported assays defining 320 metres of gold mineralisation at Otto 2 on 9 November 2026.

Otto 2 step-outs define a 320-metre trend

Magmatic Resources reported on 9 November 2026 that Reverse Circulation Drilling had defined gold mineralisation over 320 metres along strike at Otto 2, part of its wholly owned Weebo project. The campaign tested step-outs on sections approximately 80 metres apart during August and September. Hole OTRC007 returned five metres at 7.78 grams of gold per tonne from 184 metres, including two metres at 18.2 grams per tonne. It also returned two metres at 4.04 grams per tonne from 144 metres. The company reported the trend remained open to the north, the south and at depth, giving it several directions for further geological testing.

A broader campaign across three prospects

Nine Otto 2 holes accounted for 1,980 metres of the wider drilling program. The company also drilled two holes for 412 metres at Ockerburry 3 and one hole for 204 metres at Scone Stone West. In total, the program comprised 12 reverse circulation holes for 2,596 metres. Each prospect has an independent geological interpretation. At Otto 2 the follow-up focused on the continuity of gold mineralisation, while the other holes add information from separate parts of the property. The November release identifies the footage and results so the coverage at the various prospects can be distinguished.

Comparing drill assays with geophysical features

The drilled Otto 2 trend coincides with magnetic, gravity and induced polarisation responses. The company described the gold mineralisation as sulphide-rich and noted that it aligns with an induced polarisation chargeability feature extending about 800 metres. That estimate describes the extent of a survey anomaly. The drill-defined gold trend covers a smaller portion of it. The relationship between gold, the chargeability pattern and the corresponding gravity feature remains a subject for follow-up. This work can help refine where to drill, while assays from any new holes are needed to determine the concentration and distribution of gold. The reported geophysical overlap includes a relative gravity high and a magnetic response. Magmatic said the relationship with the gravity feature had yet to be determined.

What the chips show about the orientation problem

Magmatic interpreted a steep west-dipping mineralised corridor about 80 metres wide containing six gold-bearing lodes. The company built that interpretation from drill chip observations and assays. In OTRC007 it described quartz and pyrite veining in the higher-grade section. The next hole to the south, OTRC008, returned a separate two-metre interval at 1.1 grams of gold per tonne from 161 metres. Magmatic said the southern step-out appeared to pass east of the higher-grade lode or lodes encountered in OTRC007. That positioning matters because the grade difference between holes can reflect what part of a structure each one crosses. The wireline work will add structural observations that can be used to revise the interpretation. A revised model can then distinguish where to test possible continuation toward the south and where to investigate the plunge of known mineralisation.

Orientation is the next technical question

Magmatic plans to use wireline logging to assess structural orientation. That work can add information on the position and alignment of the geological features encountered in the boreholes. The company intends to incorporate the observations into decisions on where to use reverse circulation or diamond drilling next. Reported intervals reflect lengths in the holes, and additional geological measurements are needed to estimate widths and continuity across the trend. Extension targets north, south and at depth will be guided by how the company interprets structural information together with the assay and geophysical data.

The company identified plunge as a question for follow-up. Along-strike drilling tests continuation in plan view, while testing plunge can help establish where a mineralised shoot extends beneath areas already sampled.

The next Weebo decisions

The latest results Supply a basis for follow-up at Otto 2. Wireline work comes before detailed drilling design. Later holes can test whether the intersected mineralisation extends farther and whether more of the 800-metre geophysical feature corresponds to the same geology.