Key Highlights

  • Site access and drill pad preparation are complete for Reverse Circulation Drilling beneath and along strike of the historic Mona copper mine.
  • Mine dump samples returned up to 4.93% copper, 11.65 g/t gold and 204 g/t silver, according to earlier reported results.
  • Four approved drill pads have been prepared, with potential for up to two holes per pad.
  • The rig mobilisation is expected in the coming weeks, with down-hole electromagnetic surveys planned afterwards.

Cosmo Metals Ltd (ASX:CMO) announced on 17 November 2026 that it has completed site access and drill pad preparation for the first drilling programme at its Mona prospect, part of the Bingara Project in New South Wales. The exploration company said the reverse circulation programme will test a volcanogenic massive sulphide system beneath an early 1900s copper mine, and that it has not previously been drilled.

The Mona Prospect and Earlier Results

The Mona prospect lies within the Everest-Mona-Victory trend, a 5 km corridor that forms part of a broader 20 km Bingara VMS belt. The company says at least six historic copper VMS mines were worked in the belt into the early 1900s, with no modern drilling at Mona.

Earlier sampling of fresh, sulphide-rich material from the mine dumps returned up to 4.93% copper, 11.65 g/t gold and 204 g/t silver, and up to 3.2% copper with 4.14% zinc in another sample. The company says the drilling is designed to test whether similar grades exist below the historic workings.

Drilling Plan

The company has prepared four approved drill pads, with potential for up to two holes per pad, following regulatory approvals and landholder engagement. The initial holes are designed to extend through the copper-zinc lode beneath the mine workings and into a possible gold and silver rich feeder zone.

Once the drilling is complete, the company plans a programme of down-hole electromagnetic surveys to identify lateral and down-dip extensions of any massive sulphide bodies for later drill testing.

Geological Interpretation

The company describes the mineralisation as similar to Cyprus-style VMS systems, which typically produce modest tonnage but high grades. It cites rock chip samples with combined copper and zinc above 7% in the trend as supporting the interpretation.

Cosmo says the Mona drilling will provide the first test of whether a cluster of such deposits exists along the Everest-Mona-Victory corridor and the wider Bingara belt. The company also holds Nundle and other gold and antimony projects in NSW and gold projects in Western Australia.

Sector Context and Risks to Watch

Exploration results from historic mine dumps and early workings are not always representative of the deposit at depth, and the company's cautionary statement notes that these historic results were not reported under modern quality assurance and are not JORC 2012 compliant. Grade and strike continuity of the lenses have not been tested.

The main risks are the drilling results themselves, the timing of rig mobilisation and any changes to access or approvals. Future updates are expected to report assays from the first holes.

Final Word

Cosmo has prepared drill sites at Mona, where earlier mine dump samples returned high grades, and the first holes will test whether that mineralisation continues below the historic workings. Future announcements will focus on the start of drilling, assay results and the planned electromagnetic work.