Highlights

• The upgraded Flash Joule Heating (FJH) reactor dedicated to ECT's MXene production chemistry has been built, installed, and commissioned at Metallium's Gator Point Technology Campus in Anahuac, Texas.

• The reactor features four temperature probes and closed-loop control of reactor temperature and gas flow — a significant improvement over the single-probe manual system used for earlier test runs.

• The first MXene production campaign, using approximately 400 grams of ECT-supplied MAX-phase precursor, is scheduled to commence this week.

• An on-site X-ray diffractometer has been procured by Metallium, enabling rapid in-loop analysis to shorten the feedback cycle between production runs.

Environmental Clean Technologies Limited (ASX:ECT) has announced that the upgraded Flash Joule Heating (FJH) reactor built for its MXene production programme has been fully commissioned at Metallium Limited's (ASX:MTM) Gator Point Technology Campus in Anahuac, Texas. The commissioning follows cold and hot functional testing of all major systems — power supply, gas-handling lines, off-gas scrubbers, temperature controls, and safety interlocks — and marks the transition from demonstration to controlled, repeatable production under the 12-month R&D and engineering services agreement announced on 4 August 2026.

Technical Advances in the New Reactor

Unlike the external Facility used for ECT's first two flash runs (which operated with a single temperature probe and manual control), the new Gator Point system incorporates four temperature probes with closed-loop feedback control of both reactor temperature and gas flow. The reactor is also dedicated exclusively to ECT's titanium aluminium carbide MAX-phase feedstock and MXene chemistry, reducing cross-contamination risk from other materials. This level of process control is what Chief Scientist Justin Sharp described as necessary to transition from "forming MXene to producing it consistently."

Campaign and Analytical Infrastructure

The initial campaign will process approximately 400 grams of ECT-supplied MAX-phase precursor, focusing on refining operating parameters, assessing conversion and recovery rates, and evaluating the consistency of the resulting MXene material across successive runs. Metallium has procured an X-ray diffractometer for on-site laboratory analysis, enabling rapid crystalline phase identification without dependence on external laboratory turnaround times. A second reactor is being upgraded in parallel, incorporating lessons from the first unit's build.

Application Targets and Development Pathway

ECT's MXene programme targets electromagnetic interference (EMI) shielding and infrared and radar signature management for drones, aircraft, and military electronics — a significant addressable market in the defence sector. Independent coating evaluation for EM and IR performance is targeted to commence in early December 2026. The company completed the Acquisition of Xenica following the exchange's approval on 16 November 2026, integrating MXene licences into ECT's broader technology platform.

Key Insights

The dedicated reactor is installed at Metallium’s Gator Point campus. The setup includes closed-loop control and on-site materials analysis.