Category: mining

Key Highlights

  • Metallium (ASX:MTM) was trading at A$0.44 at 10:38 am on 14 August 2026, up A$0.035, or 8.75% on the day.
  • Recent Flash Joule Heating testing produced results across rare earth elements, germanium, platinum group metals and red mud feedstocks.
  • Testing converted raw rare earth ore containing about 12% total rare earth oxide into a mixed rare earth chloride product exceeding 83% by weight.
  • The company is progressing commercial discussions with industry participants while continuing to prioritise electronic waste processing and strategic sourcing of technology metals.

Metallium (ASX:MTM) was trading at A$0.44 at 10:38 am on 14 August 2026, up A$0.035, or 8.75% on the day. The company released an update on 12 August detailing results from a series of Flash Joule Heating (FJH) development campaigns across several critical mineral and industrial waste feedstocks.

While electronic waste remains Metallium's immediate commercial focus, the latest testing indicates that the company's proprietary processing technology is being evaluated across a wider range of materials. The programs cover rare earth elements, germanium, platinum group metals and red mud, creating several potential applications for the underlying processing platform.

Rare earth testing demonstrates significant concentration

One of the testing campaigns focused on raw, unbeneficiated rare earth ore containing approximately 12% total rare earth oxides. Metallium reported that FJH processing converted the material directly into a mixed rare earth chloride product exceeding 83% by weight.

The initial test also achieved more than four-times enrichment of neodymium-praseodymium, or NdPr. The company described the test as an initial, unoptimised campaign, meaning further development work is still required to determine the commercial characteristics of the process.

NdPr is an important group of rare earth elements used in high-performance permanent magnets, with applications across electric motors, renewable energy equipment and other advanced technologies. The ability to process raw material without conventional beneficiation could therefore represent an area for further technical evaluation.

Germanium testing covers multiple waste streams

Metallium also reported results from germanium-bearing secondary feedstocks. Testing produced enrichment of up to 280 times from zinc smelter waste, 240 times from semiconductor Manufacturing waste and 35 times from defence-related industrial waste.

The range of feedstocks is notable because it demonstrates that the FJH platform is not being tested against a single waste category. Instead, the company is examining its ability to process different industrial materials containing strategically important metals.

Germanium is used in areas including semiconductors, fibre optics, infrared technologies and other specialised applications. Metallium continues to work with Indium Corporation and other semiconductor industry suppliers on potential sources of gallium, germanium, indium and other technology-metal-bearing secondary raw materials.

PGM testing targets automotive recycling

Another testing campaign involved spent automotive catalytic converters, which contain platinum group metals including platinum, palladium and rhodium.

Metallium reported producing a PGM-rich product with purity exceeding 60% in a single, unoptimised treatment cycle. The company said the result demonstrates the potential for a simplified recycling pathway compared with conventional processing approaches.

Catalytic converters represent an established secondary source of PGMs, making processing efficiency and recovery Economics important considerations for recycling technologies. Metallium's result provides a basis for further testing rather than establishing a completed commercial process.

Red mud testing adds another industrial waste application

The company also tested red mud, a major industrial waste stream associated with alumina production. The campaign removed approximately 99% of iron and 94% of silicon while retaining about 95% of aluminium.

Gallium was also concentrated into a separate product stream. This outcome provides another example of Metallium applying FJH to complex industrial materials while seeking to separate valuable elements from unwanted components.

The potential to process waste streams while recovering critical metals could broaden the range of applications available to the company's technology platform.

Commercial discussions progress alongside testing

Metallium said several testing programs were initiated following approaches from industry participants across defence, manufacturing and critical minerals. The company is now progressing technical evaluations and commercial discussions around potential opportunities.

The potential commercial model extends beyond Metallium-owned processing operations. The company is also considering technology licensing and strategic partnerships, which could allow FJH applications to be deployed across third-party feedstocks and facilities.

This approach could provide multiple routes to commercialisation, although the current opportunities remain subject to further technical validation and negotiations.

E-waste remains the immediate priority

Despite the expansion into other feedstocks, electronic waste remains Metallium's immediate commercial priority. The company is continuing discussions with semiconductor industry suppliers and pursuing strategic sourcing initiatives involving gallium, germanium, indium and other technology metals.

The broader testing program therefore operates alongside rather than replacing the company's e-waste strategy. If further testing confirms repeatable processing performance across different materials, Metallium could potentially develop a broader portfolio of applications around its FJH technology.

Conclusion

Metallium's latest testing program expands the potential application base of its Flash Joule Heating technology beyond electronic waste into rare earth ores, germanium-bearing industrial waste, spent catalytic converters and red mud. The reported results demonstrate material concentration and separation outcomes across several feedstocks, although the campaigns remain part of an ongoing development process. With commercial discussions underway with industry participants and additional strategic sourcing initiatives continuing, the company is developing several potential pathways for its technology. The next stage will depend on further technical optimisation, validation and the conversion of current discussions into commercial arrangements.