Aldoro Resources Limited (ASX:ARN) has commenced a 1,930m two-rig, low-dip diamond drilling campaign at the Nordenberg target within the Copper Hill Project (EPL 7895), located approximately 20km north of Kalkfeld in central Namibia, to test an interpreted large-scale porphyry copper-gold system at depth.
Key Points
- Drillholes CH001 (1,280m) and CH002 (650m) are advancing simultaneously from opposite southern flanks of the Nordenberg target
- Aldoro's wholly owned Diamec Smart 8 rig is drilling CH001 and its wholly owned Nock 800 rig is drilling CH002, with on-site support from an Epiroc specialist engineer
- Previous surveys identified a concentric ground magnetic anomaly and multi-element soil geochemical anomaly exceeding 2.5km in diameter, featuring a central copper core (Cu >30 ppm) surrounded by molybdenum (Mo >8 ppm) and potassium (K ~2%) halos
- Data processing and geophysical interpretation from an intermediate-gradient induced polarisation (IP) survey across the Nordenberg target area are progressing in parallel
Nordenberg Drillhole Parameters and Low-Dip Design
The two active drillholes have been positioned at three planned perimeter low-dip collar locations on the southwestern, southeastern, and eastern flanks of the Nordenberg anomaly. CH001 is planned to a depth of 1,280m with an azimuth of 50° and a downward dip of 30°, with collar coordinates at Easting 625,475m and Northing 7,709,901m (elevation 1,414m). CH002 is planned to a depth of 650m with an azimuth of 330° and a downward dip of 50°, collared at Easting 626,302m and Northing 7,709,692m (elevation 1,426m). All collar coordinates are referenced to UTM WGS84 Zone 33S. The converging low-dip geometry is designed to transect the peripheral alteration halo, contact zone, and interpreted central copper-gold core.
Dual-Rig Deployment and Epiroc Specialist Support
Aldoro's wholly owned Diamec Smart 8 automated deep-capacity diamond core rig is drilling CH001 following on-site commissioning and low-dip operational setup led by a senior specialist engineer from original equipment manufacturer Epiroc. The company's wholly owned Nock 800 diamond core rig has been mobilised to Nordenberg and is drilling CH002 concurrently. According to the filing, deploying both wholly owned rigs simultaneously is stated to cut the completion timeframe in half. Executive Chairperson Quinn Li stated that the dual-rig approach also allows the company to operate at a fraction of conventional third-party contractor costs, and that the Copper Hill site leverages shared camp infrastructure, technical crews, and the wholly owned drilling fleet from the nearby Kameelburg project.
Complementary IP Survey and Third Planned Drillhole
Alongside the active diamond drilling programme, data processing and geophysical interpretation from an intermediate-gradient induced polarisation (IP) survey across the Nordenberg target area are progressing in parallel. The IP survey is designed to map subsurface chargeability and resistivity responses associated with disseminated and vein-hosted sulphides, including chalcopyrite and pyrite. According to the filing, the resulting three-dimensional targeting vectors will guide the third planned perimeter hole, CH003, positioned on the eastern flank, as well as subsequent step-out drilling. A third collar position for CH003 has been identified as part of the overall three-hole perimeter layout at Nordenberg.



Please wait processing your request...