Key highlights
- Chilwa Minerals (ASX:CHW) reported laboratory assays from two Nakombe holes.
- One hole returned 57 metres at 0.315% niobium pentoxide from surface.
- The company is targeting a first resource estimate in May or June 2027.
Shares in Chilwa Minerals (ASX:CHW) were quoted at AUD 0.465 on 20 November 2026, down 8.82%. The S&P/ASX 200 also traded lower during the session. The company, a mineral explorer working in Malawi, reported laboratory niobium and rare earth assays from Nakombe on 30 October 2026.
Laboratory results firm up a near-surface interval
On 30 October 2026, Chilwa Minerals released laboratory results for two drill holes at Nakombe in southern Malawi. Hole MPYDD009 returned 57 metres at 0.315% niobium pentoxide from surface, including 14 metres at 0.426% from 43 metres. The whole 385.4-metre hole averaged 0.192% niobium pentoxide, compared with 0.17% from previously reported portable X-ray fluorescence measurements. The laboratory assays supersede the earlier readings. This gives the team an updated set of grades to use when interpreting the mineralised zone and assessing the consistency of measurements from its two analytical methods.
A southern hole adds evidence across the trend
Hole MPYDD015 returned 22 metres at 0.243% niobium pentoxide from 349.5 metres downhole. That interval sits within a 202.5-metre section averaging 0.161% from 199 metres to the end of the hole. The comparable earlier reading for the 22-metre interval was 0.228%. The company drilled MPYDD015 from a different orientation as a paired hole to MPYDD009. It cited the pair as evidence for continuity across 270 metres of strike tested so far. Drilling was continuing to the east, and the company reported the system was open at depth, to the east and to the north.
Yttrium forms part of the rare earth assays
Chilwa also reported rare earths across both holes. In MPYDD015, 12.5 metres from 389 metres to the end of the hole returned 1,855 parts per million total rare earth oxides, with yttrium oxide representing 24.5% of that total. MPYDD009 averaged 1,415 parts per million total rare earth oxides over the entire hole, with yttrium oxide at 17.0% of the total. Tantalum and gallium were also reported in the upper interval of MPYDD009. These assays quantify concentrations in the samples. Mineralogical and metallurgical work will address how the elements occur and what might be recoverable. In the upper 57 metres of MPYDD009, the company reported 174 parts per million tantalum and 61 parts per million gallium. The assays give concentrations for these elements within the same near-surface interval.
Infill work ahead of a first estimate
Three diamond rigs were operating across the project when the company reported the results. A six-hole infill programme was underway at Southern Nakombe, which Chilwa aimed to complete before year end. It planned to resume work at Nakombe North in 2027. The company also identified mineralogy as a technical priority for understanding the minerals that host niobium and rare earths. Resource estimation will depend on the full drilling and assay database and how the holes define grade and continuity. The provisional target for publication of a first estimate was May or June 2027.
Chilwa said the current laboratory results also followed a previous example of lower field readings in hole MPYDD006. The October release gives the assay technique and makes clear which earlier readings the results replace for the current two holes.
Nakombe within the wider Lake Chilwa licence
Chilwa describes separate programmes across the licence footprint. These include Nakombe’s niobium, rare earth, tantalum and gallium work, other exploration targets, a heavy mineral sands programme and earlier-stage work on possible clay-hosted rare earths. The assays highlighted in October concern the Nakombe holes. The other programmes involve different target types and cannot be assessed using the same intervals. At Nakombe, mineralogical examination will help identify where the assayed elements are hosted. That matters because two samples with similar total oxide concentrations can contain those elements in different minerals, with different implications for processing. The estimate being targeted for May or June 2027 will depend on the drilling and geological work completed for the area it covers. Separate programmes within the licence may continue on their own schedule as the technical team ranks results.
What the new assays establish
The release replaces two sets of preliminary readings with laboratory values and provides additional composition data. The next work will test the open portions of the zone and build geological coverage where the company plans to estimate a resource.






Please wait processing your request...