Highlights

  • NSW permits dual occupancies with consent in R2 zones across the state.
  • Expanded housing controls apply near 171 nominated stations and town centres.
  • Minimum lot size and width requirements differ for duplexes, terraces and townhouses.
  • Site exclusions and local planning checks remain relevant before development approval.

New South Wales homeowners considering a second dwelling or small residential development have more Options under the Low and Mid-Rise Housing Policy. Its first stage broadened dual occupancy permissions statewide, while the second enabled additional terraces, townhouses and apartment buildings in designated locations close to transport and town centres. The changes do not guarantee development approval.

Two Stages of the Housing Policy

The first stage commenced on 1 July 2024, allowing dual occupancies and semi-detached homes with consent in the R2 low-density residential zone across NSW. A dual occupancy contains two homes on one lot, which may be attached or detached. The second stage began on 28 February 2025 and changed controls for more housing forms within defined low and mid-rise areas.

These areas are within 800 metres walking distance of 171 nominated town centres and train or light rail stations. They span Greater Sydney, the Central Coast, the Lower Hunter and Newcastle, and Illawarra-Shoalhaven. The department has described potential delivery of up to 112,000 homes over five years, an estimate rather than homes already completed.

What Home Types Are Permitted?

Within qualifying policy areas, terraces and multi-dwelling housing such as townhouses and villas may be permitted with consent in R2 zones. Residential flat buildings may also be permitted with consent in R2 and R3 zones. Permission remains tied to zoning and the applicable conditions. Low-rise housing commonly includes dual occupancies, terraces, townhouses and manor houses, while taller buildings are addressed by separate mid-rise controls.

Lot Dimensions and Building Height Limits

In low and mid-rise housing areas, the published non-discretionary standards for a dual occupancy include a minimum 450-square-metre lot, 12-metre width, 0.65:1 floor space ratio and 9.5-metre height. One parking space is required per dwelling. Where subdivision is permitted in relevant residential zones, individual lots may be as small as 225 square metres, subject to the standards.

Terrace housing requires at least 500 square metres and 18 metres of frontage, with a 0.7:1 floor space ratio and a 9.5-metre height limit. Multi-dwelling townhouse and villa projects require at least 600 square metres and 12 metres of width. These dimensions help establish whether a concept is plausible, but satisfying them does not remove the need for development consent.

For residential flat buildings in applicable R3 and R4 areas, the inner 400-metre band allows up to six storeys and 22 metres. Between 400 and 800 metres, the corresponding maximum is four storeys and 17.5 metres. These limits are not universal permissions for every property near a station.

Why Site Restrictions Still Matter

The policy excludes certain constrained land, including locations affected by serious bushfire or flood risks, dangerous goods pipelines, high aircraft noise or specified heritage protections. Some local government areas are outside its coverage. The state map is indicative and cannot determine every individual property constraint or walking route.

Non-discretionary standards prevent refusal solely because a complying proposal fails a more onerous equivalent local standard. They do not eliminate other planning considerations or guarantee approval. Owners should check the legal zoning, mapped exclusions, property dimensions and council assessment requirements before incurring design costs.

Key Insights

The NSW policy creates additional housing possibilities, particularly around nominated centres, but eligibility is parcel-specific. Dual occupancies have statewide R2 permissions with consent, while expanded townhouse, terrace and apartment controls operate within designated areas. Minimum dimensions, exclusions and the distinction between permissibility and approval remain central to any project.