Highlights

  • A drone survey covered 8.66 square kilometres with 174.5 line-kilometres flown.
  • Anomalies align closely with the Vero resource and Aquila discovery.
  • New targets include Ivena North, Rhea and an extended Aquila South.
  • None of the new targets has been drill-tested.
  • A maiden Aquila resource is targeted for mid-2027, subject to results.

True North Copper (ASX:TNC) reported on 18 November 2026 the results of a drone-borne geophysical survey over its Mt Oxide Project in north-west Queensland. The survey is background to the company's current Phase 2 drilling rather than a new discovery.

The Survey

The survey used UAV sub-audio magnetics, in which a drone tows a receiver to measure the ground's electrical response and detect conductive features that may reflect sulphide copper mineralisation. Gap Geophysics flew 174.5 line-kilometres at 50-metre spacing over 8.66 square kilometres in October. The work was partly funded by a Queensland Government Collaborative Exploration Initiative grant.

Its objectives were to detect near-surface conductors linked to copper-cobalt-silver mineralisation along the Mt Gordon Fault Zone and its splays, to map structural flexures and possible dilation zones, and to improve three-dimensional models of Vero and Aquila.

Calibrated Against Known Copper

The anomalies line up closely with known mineralisation at the Vero resource and the Aquila discovery, and True North Copper (ASX:TNC) is using those responses as a baseline to judge other anomalies. Managing director Andrew Mooney said the correlation provides further validation of the exploration approach.

Around Vero, the survey defined a north-east trending conductivity zone about 1.7 kilometres long. The section associated with Vero is about 1.2 kilometres long and up to 280 metres wide, while a separate north-west trending Mara anomaly measures about 400 by 600 metres. At Aquila-Chidna, a north-south conductive trend runs about 1.4 kilometres and remains open in both directions. A parallel Apollo anomaly measures 970 by 120 metres.

New and Refined Targets

The company says the survey identified new prospective targets along a mineralised corridor of more than 10 kilometres. Ivena North extends 1.6 kilometres beyond Ivena, where haematitic breccias, copper oxides and historic prospecting occur, and is open at the survey boundary. Rhea is about one kilometre long and up to 170 metres wide, interpreted as a splay of the Mt Gordon Fault.

Aquila South has been extended by about 840 metres, and two untested sub-parallel trends near Aquila measure 470 by 100 metres and 350 by 150 metres. South of Vero, a 600-metre anomaly lies to the north-west and a zone of more than 1.7 kilometres to the south. True North Copper (ASX:TNC) says recent drilling and surface sampling had already extended the Aquila-Chidna corridor beyond four kilometres.

Limits and Timeline

Vero holds an Indicated and Inferred resource of 15.03 million tonnes at 1.46% copper for about 220,000 tonnes of contained copper. The new anomalies are relative conductivity measurements, not discoveries. None has been drill-tested and no new assays were reported. Conductors can arise from barren sulphides or carbonaceous rocks, although the company notes that a splay at Ivena North crosses resistive quartzite, which it says reduces the likelihood of a carbonaceous source.

Phase 2 drilling at Aquila, Vero-Mara and selected targets is underway, weather permitting. True North Copper (ASX:TNC) plans integrated analysis of induced polarisation and sub-audio magnetic data through January 2027, progressive release of Phase 2 assays from December to March, and 2027 programme planning in the June quarter. It targets a maiden Aquila Mineral Resource Estimate in mid-2027 and the start of Vero development studies in the second half of 2027, both subject to results.

Key Insights

True North Copper (ASX:TNC) has added geophysical targets to its Mt Oxide pipeline. They remain untested, and the planned resource and study milestones depend on drilling results.