Key Highlights

  • The Virginia plant ran on a 24/7 schedule in the June 2026 quarter, with powder quality meeting or exceeding Grade 5 parameters.
  • The FY2026 net loss after tax was US$66.8 million, compared with US$35.3 million in FY2025.
  • Cash was US$35.2 million at 30 June 2026, down from US$54.8 million a year earlier.
  • The Titan project feasibility study reported an after-tax NPV of US$813 million at an 8% discount rate and an IRR of 39.4%.

How far has IperionX (ASX:IPX) come in turning titanium technology into a manufacturing business? The latest evidence, from its June 2026 quarterly report released on 30 July 2026, is that its Virginia plant is running around the clock and ramping towards a powder capacity target, but the company is still loss-making, reliant on external funding and well short of its stated ambitions. All dollar figures below are in US dollars unless stated.

What IperionX does

IperionX is a titanium company with a US focus. Its core is a proprietary process, referred to in its reports as HAMR, that converts titanium feedstock, including recycled scrap, into spherical titanium powder, which can then be pressed and sintered into components such as fasteners. Its production operations are in Virginia.

Unlike a conventional miner, it does not yet sell large volumes of a commodity. The quarterly report focuses on titanium powder and components, and it does not describe revenue. Separately, the company holds mineral assets in the United States through its Titan project and the newly acquired Atlas property. The report does not detail other commodities, so this article does not characterise the project's mineral mix.

Production ramp and customers

According to the June 2026 quarterly report, operations ran on a 24/7 schedule, with powder quality meeting or exceeding Grade 5 parameters. Furnace downtime temporarily reduced volumes, though the company said operations returned to their normal ramp and downstream supply was unaffected.

The stated target is about 200 tonnes per annum of powder run-rate capacity by the end of calendar 2026, subject to ramp-up and optimisation. The company's year-end results also list a 1,400 tonnes per annum expansion for 2027 and over 10,000 tonnes per annum of components by 2030. These are management targets, not results.

On the manufacturing side, a 300-ton powder metallurgy press completed commissioning in May 2026, tripling existing pressing capacity, and the first of two additional sintering furnaces has arrived. Testing by the US Army's ground vehicle systems centre found titanium fasteners exceeded the torque-to-yield performance of SAE Grade 8 steel, and a further Army purchase order for prototype fasteners followed after quarter-end. Carver Pump and Ford are among those evaluating or developing components, which at this stage are prototypes.

Government support

US government backing is a distinctive feature. IperionX reports a US$47.1 million Industrial Base Analysis and Sustainment award, fully obligated and supporting a pathway to 1,400 tonnes per annum, a US$12.7 million Defense Production Act Title III award, and a Small Business Innovation Research Phase III contract pathway of up to US$99 million.

Reimbursable funding is not the same as cash in hand. At 30 June 2026, US$37.1 million of obligated reimbursable funding remained, including US$2.9 million of eligible spending not yet reimbursed, and a US$2.4 million reimbursement arrived shortly after quarter-end. That cash arrives only as spending occurs.

Losses and funding

The full-year result reports a net loss after tax of US$66.8 million for FY2026, compared with US$35.3 million in FY2025, attributed to higher research, ramp-up and administrative costs.

Cash was US$35.2 million at 30 June 2026, down from US$54.8 million a year earlier. On 7 July 2026 IperionX priced an underwritten US offering of 2,275,000 American depositary shares at US$21.98 each, raising about US$50 million before costs. The company says pro forma cash after that offering and the reimbursement was about US$84 million.

Raising equity dilutes existing holders, a trade-off with funding growth. The report also notes that directors and officers bought securities worth about US$4.3 million in March and April 2026 and a further US$1.9 million in July.

The Titan project and Atlas

In June 2026 IperionX completed a definitive feasibility study for the Titan project. It reported an after-tax net present value (at an 8% discount rate) of US$813 million, an after-tax internal rate of return of 39.4%, payback of 3.6 years and forecast after-tax free cash flow of US$1.9 billion over an initial 14-year mine plan. These are company projections that depend on assumptions about prices, costs and financing, and are not results.

The US$3 million acquisition of the Atlas property completed on 1 July 2026. The company described about 70 acres of surface stockpiles, about 180 acres of pre-stripped mineralisation and existing power, water, gas and rail infrastructure. It aims to produce an integrated Atlas-Titan assessment by the end of 2026.

The mix of funding sources is worth noting. Government awards, equity offerings and potentially project finance each carry different conditions, and the company has so far relied heavily on the first two. How that balance shifts as the Titan project is developed will influence both the pace of expansion and the extent of dilution.

Risks and things to monitor

Key issues include whether the ramp reaches the 200 tonnes per annum target by year-end, how revenue develops from a small base, and the pace of cash use against remaining government reimbursements. Investors may also watch the next quarterly report, expected later in the year, for updated cash, production and customer information, as well as GenX, the next-generation continuous HAMR platform still in development.

Finally, the Titan study's headline numbers should be treated as an early estimate: permitting, financing and commodity price assumptions all stand between a study and production, and none of those steps is guaranteed to follow the timetable the company has set.