Key Highlights
- Flotation tests on Callisto diamond core recovered up to 85% of palladium and up to 94% of copper.
- Seven tests were run on a 12-metre composite from hole 26NRDD525 at grinds of 98 and 75 microns.
- Aircore drilling totalling 3,568m at North Callisto, along strike and at South Callisto is complete, with assays due in about six weeks.
- An RC program of around 2,000m is scheduled at Mission Sill from early November, targeting two zones over 1.4km and 2km.
Galileo Mining Ltd (ASX:GAL) has reported metallurgical results from its Callisto palladium-copper deposit at the wholly owned Norseman project in Western Australia, with conventional flotation recovering up to 85% of palladium and up to 94% of copper from diamond drill core. The company also confirmed that aircore drilling north and south of the 17.5 million tonne Callisto resource has finished, and that reverse circulation drilling at the Mission Sill prospect is scheduled to begin in early November.
Flotation Tests on Callisto Core
ALS Metallurgy Pty Ltd carried out the test work on a single bulk composite taken from a continuous twelve-metre interval between 147 and 159 metres in diamond hole 26NRDD525, within the disseminated sulphide zone. The composite assayed 2.05 g/t palladium, 0.43% copper, 0.39% nickel, 0.32 g/t platinum and 0.10 g/t gold. Seven flotation tests were completed, four at a coarser grind of p80 of 98 microns and three at a standard p80 of 75 microns, using different reagent combinations.
Palladium recovery ranged from 79.0% to 85.1% across the tests, with the 85.1% result coming from the 98-micron grind and a concentrate grade of 18.1 g/t palladium. Copper recovery reached 94.2% in the first test at 98 microns, which graded 2.79% copper, and was 93.7% to 93.9% in two of the 75-micron runs. Nickel recoveries sat between 69.0% and 75.1%, platinum between 70.6% and 76.4%, and gold between 71.1% and 81.6%. Galileo noted that further work is needed to examine how grind size relates to recovery, since grind size affects energy consumption.
The company said the response of the sample to standard flotation supports its expectation that other sulphide discoveries in the district would behave in a similar way, citing consistent geology along 20km of prospective strike around Callisto and 12km at Mission Sill. The Callisto resource stands at 17.5 million tonnes at 1.04 g/t 4E, 0.20% nickel and 0.16% copper, equal to 2.3 g/t palladium equivalent.
Aircore Drilling at North and South Callisto
An aircore program has been completed over the North Callisto prospect, where rock chip sampling 2 kilometres north of the resource returned up to 1.87 g/t 3E. Reconnaissance aircore holes were also drilled further north along strike in areas without earlier drilling, and a new gold prospect at South Callisto was tested. The three areas together account for 3,568 metres of drilling, and assay results are expected in approximately six weeks. Aircore drilling tests near-surface weathered rocks for geochemical anomalism, and the North Callisto target was first identified from surface sampling reported on 22 July 2026.
Mission Sill RC Program
A reverse circulation program of around 2,000 metres is scheduled to start in early November at Mission Sill. Aircore drilling announced on 10 August 2026 showed mineralisation on every line drilled, and exploration is now focused on two zones of platinum group metal anomalism, Zone A over 1.4km and Zone B over 2km. Limited RC drilling in December 2025 established shallow sulphide mineralisation within both zones, and the new holes will test those zones down dip and along strike. Earlier intercepts include 8m at 0.42 g/t 3E from 24m in NRC518, 17m at 0.36 g/t 3E from 84m in NRC519 and 16m at 0.27 g/t 3E from 88m in NRC513.
Where the Norseman Program Stands
Galileo holds 100% of the Norseman project, which covers 255 square kilometres of tenure and includes Callisto, Jimberlana and Mission Sill. The test work places recoveries of up to 85% palladium and 94% copper on record for Callisto core, with aircore drilling finished and RC drilling at Mission Sill due to commence in November.






Please wait processing your request...