Fortuna Metals (ASX:FUN) has released an updated Mineral Resource Estimate (MRE) for its Mkanda Project in Malawi, reporting 34,100 tonnes of contained monazite and 97,400 tonnes of contained zircon at a 0.7% rutile cut-off, alongside a resource of 292.5 million tonnes at 0.86% rutile and 1.35% total graphitic carbon (TGC).
Key Points
- Updated MRE reports 34,100 tonnes of monazite and 97,400 tonnes of zircon at a 0.7% rutile cut-off, with all mineralisation classified as Inferred.
- Principal reporting envelope of 292.5 Mt at 0.86% rutile and 1.35% TGC at the 0.7% rutile cut-off.
- A 7,618m aircore drill program has been completed, with first results from Mlongo and Kahuna returning high-grade rutile to the saprock boundary of more than 20m deep.
- Further test work is in progress at Mineral Technologies' Carrara facility in Queensland to optimise recoveries for a Pre-Feasibility Study (PFS).
- An updated MRE incorporating expanded drilling is anticipated by mid-2027.
Mkanda MRE Monazite and Zircon Estimates
The updated MRE for the Mkanda Project estimates zircon and monazite quantities using accessory mineral calculations derived from the non-magnetic XRF fraction, with a standard industry stoichiometric calculation used to determine mineral species present, supported by physical separation test work and QEMSCAN mineralogy. At a 0.4% rutile cut-off, the resource contains 297,900 tonnes of zircon and 88,600 tonnes of monazite. At the principal 0.7% cut-off, contained zircon is 97,400 tonnes and contained monazite is 34,100 tonnes. All mineralisation is classified as Inferred. The company noted that estimated zircon and monazite are not TREO, recoverable product or saleable concentrate estimates.
Drilling Programs at Mkanda and Kampini Projects
The Mkanda and Kampini Projects extend over 658 square kilometres in Malawi, located approximately 20 kilometres south of Sovereign Metals Limited's Kasiya rutile project. A total of 1,323 hand auger drillholes have been completed across Mkanda for a total of 10,713 metres at an average depth of 8 metres. The 2026 hand auger infill drill program totalled 648 drill holes averaging 8 metres for 5,313 metres. The completed 7,618-metre aircore program drilled to an average of approximately 22 metres. Reconnaissance first-pass drilling at Kampini completed in Q4 2026 totalled 66 drill holes, with the objective of traversing the tenement from west to east to identify high-grade rutile areas.
Ongoing Work Streams and Resource Expansion Outlook
According to the filing, the company is advancing multiple concurrent work streams, including push-tube drilling for density analysis and verification of resource drilling, lidar topographical mapping for MRE updates and mine and closure planning, metallurgical bulk sample testwork, conceptual studies, pilot plant studies, graphite flotation test work, rare earth analysis, farm trials, and marketing and offtake discussions with downstream buyers and trading houses. Further test work is in progress at the Mineral Technologies Carrara facility in Queensland to optimise recoveries for the Pre-Feasibility Study. Aircore results from the remainder of the drill program are expected on an ongoing basis over the next four to six months.





Please wait processing your request...